Plug Valve(Connection Lift ANSI)

Date: 17 Nov 2009

Main structural features

Bolt bonnet OS & Y lifting-round plug.

Opening and closing of the valve is carried out while the sealed surface is taken off,so it will not cause abrasion on the sealed surface.Double direction.

 

Principle of opening and closing of the valve

process of opening and closing of the valve.When opening the valve,first of all,turn the hand wheel to make the plug lifted and separated with the sealed surface,the turn the handled by 90 degree to connect the channel of plug th the channel of valve body.So that the valve is opened.When closing the valve,first of all turn the handle by 90 degree to mark the channel of plug vertical to the channel of valve body,and then the hand wheel to descend the plug.So that the valve is closed.

 

Standards compliance

Design and Manufacture: API 599,API 6D

Face to face(end to end): ANSI B 16.10

Flanged connection: ANSI B16.5

Butt welded end: ANSI B16.25

Contact information:
Company:
Address:
Zhejiang zhonggong valve Group
(No.5,Five Star Avenue)Five star Industrial Zone,Oubei town,Wenzhou city, Zhejiang province.P.R.China[0]
Send message
Membership: Sign In, Or Register now.
[ Close ]   [ Print ]   [ Top ]
Best Viewed With Internet Explorer 6.0
© 2008 DRS iNNOVATIONS GROUP LTD. All Rights Reserved