Pneumatic Butterfly Valve Cut Express

Product Description 
I. Product Overview

  Butterfly valve series of quick-cut ALKD673H introducing advanced foreign technology, the three eccentricity metal hard sealing multi-layered structure,Are widely used in medium temperature of ≤ 600 ℃ metallurgical, power, petrochemical and other industrial pipes for the use of cutting fluid, switch time 1 - 5 sec.Three eccentric structure, seat and disc sealing surface plate are stainless steel with different hardness and production, has good corrosion resistance, long service life, product line with national standards GB/T13927-92 valve pressure test.

Second, the characteristics of

1, the valve sealing three-eccentric structure, the valve seat and the butterfly board almost no wear and tear, with more tightening of the sealing concept features.
2, selection of stainless steel ring, both in low-temperature and high temperature cases, both with excellent sealing performance, with a corrosion-resistant, long life and so on.
3, disc plate sealing surface using cobalt-based hardfacing alloy, wear-resistant sealing surface, long service life.
4, the use of large-sized butterflies hang board structure, high strength, large over-current, small flow resistance.
5, drives can be multi-bit (rotation 90 ° or 180 °) to install, user-friendly.

Third, the main technical parameters

Nominal by: DN (mm) 50 ~ 2000
Nominal pressure: PN (MPa) 0.6 1.0 1.6 2.5
Seal Test (MPa): 0.66 1.1 1.76 2.75
Strength (MPa): 0.9 1.5 2.4 3.75
The application of temperature: carbon steel: -29 ℃ ~ 425 ℃ Stainless steel: -40 ℃ ~ 600 ℃
The application of media: air, gas, gas
Leakage rate: GB/T13927-92 standards in line with
Drive: pneumatic

Fourth, the main components of materials

Part Name    Material
Body: WCB, alloy steel, stainless steel, QT450-10
Butterfly Board: WCB, alloy steel, stainless steel, QT450-10
Valve axis: 2Cr13 stainless steel, alloy steel
Ring: stainless steel ring
Filler: Flexible Graphite

Fifth, the use of standard

Manufacturing standard: JB / T 8527-97
Flange standard: GB9113-2000
The structure of the length of the standard: GB12221-89
Test: GB / T 13927-92

The cost of introducing:
The contact about this company is Fees Information, you must spend a small amount of money to obtain it. Click Here to see the price table.
Contact information:
Company:
Address:
BEIJING AerKen MACHINERY CO .,LTD
Beijing Economic and Technological Development Zone No. 79 Road dayangfang[100068]
Send message
Membership: Sign In, Or Register now.
[ Close ]   [ Print ]   [ Top ]
Best Viewed With Internet Explorer 6.0
© 2008 DRS iNNOVATIONS GROUP LTD. All Rights Reserved